What is a scale factor?
When a shape is enlarged or reduced without changing its shape, every length is multiplied by the same number. That number is the scale factor. Photocopying a picture at 150% uses a scale factor of 1.5; a map drawn at 1:50,000 uses 1/50,000.
Scale factor formula
Scale factor = new length ÷ original length
Always divide matching sides, and always put the new (image) length on top. If you divide the other way you get the scale factor for going back from the copy to the original, which is the reciprocal.
How to find the scale factor: examples
- A triangle with a 6 cm side is copied with that side 9 cm long: 9 ÷ 6 = 1.5, an enlargement.
- A 20 ft wall is drawn 4 inches long on a plan. Convert first: 20 ft = 240 in, so 4 ÷ 240 = 1/60, a reduction.
- A model car is 1:24. Its scale factor from the real car is 1/24, so a 4.8 m car becomes 0.2 m (20 cm).
Scale factor, area and volume
Lengths multiply by the scale factor k, but areas multiply by k² and volumes by k³. Doubling every side of a square (k = 2) makes its area 4 times larger; doubling the sides of a cube makes its volume 8 times larger. That's why the calculator shows all three.
Scale factor and dilations
In geometry, a dilation enlarges or shrinks a figure from a fixed center point. Every point moves along a line from the center, and its distance from the center is multiplied by the scale factor. Matching sides of the original and the image are in proportion, so you can also set up a proportion and solve it with the proportion calculator. For screens and photos, the aspect ratio calculator keeps width and height in step.